AC Installation Cost in Lewisville, TX (2026)
Real 2026 price ranges and local contractor comparisons for AC installation in Lewisville, TX — including rebates, refrigerant changes, and what to ask.
Real 2026 price ranges and local contractor comparisons for AC installation in Lewisville, TX — including rebates, refrigerant changes, and what to ask.

For most Lewisville homeowners replacing a central AC system in 2026, the installed cost lands somewhere between $7,000 and $16,000 depending on system size, equipment tier, and whether ductwork needs attention. Two industry-wide changes — the mandatory shift to A2L refrigerants (R-454B replacing R-410A) and updated SEER2 efficiency standards — pushed prices up roughly 5–10% compared to 2024, so older quotes are no longer reliable. Getting two or three written bids from licensed local contractors is the single most effective way to avoid overpaying in this market.
| Contractor | Best For | Standout Fact | Notes |
|---|---|---|---|
| Northside Air Conditioning | Specialty systems, high-accountability service | NATE/ACCA certified; American Standard Pinnacle Award winner; A+ BBB; voted best HVAC in Denton County | Lewisville-based since 2004; northsideair.com |
| Southern Comfort Mechanical | Homeowners who value consistent local recognition | Best of Denton County four years running; licensed HVAC (#TACLA104577C) and plumbing | Located at 174 Lake Park Rd, Lewisville; scmdfwair.com |
| Select Air Conditioning & Heating | Family-owned experience with deep local roots | Owner-operated since 2008; 30-year family legacy in HVAC; serves Flower Mound, Denton, Carrollton, Coppell | Lewisville-based; selectac.com |
| A#1 Air | Homeowners who want a larger certified operation | Six-time Best of DFW AC award winner; NATE, EPA, ACCA, TACCA, EGIA memberships; A+ BBB | DFW-wide with Lewisville service; anumber1air.com |
| TexAire Heating & Air Conditioning | Navigating the 2026 refrigerant transition | Actively guides customers through R-454B changeover; services all major brands | Useful if your existing system uses R-410A; texaire.com |
Both of these companies are rooted in Lewisville and have been operating long enough to understand the specific demands of North Texas summers — sustained heat above 100°F, high attic temperatures that stress ductwork, and the mix of older and newer construction across neighborhoods like Castle Hills, Valley Vista, and Lakeland Village. Northside Air has held NATE and ACCA certifications since its founding in 2004 and carries specialties in variable speed and ductless systems, which matter if your home has zones with uneven cooling. Select Air has been family-owned and owner-operated since 2008, with industry experience going back to 2000. For a homeowner who wants to talk directly with someone who has pulled permits in Lewisville before and knows the city’s inspection process, either of these is a reasonable starting point.
If third-party validation matters to you, both of these contractors have earned repeated recognition. Southern Comfort Mechanical has won Best of Denton County four years in a row and holds dual licenses in HVAC and plumbing — useful if your project involves any condensate drain or line set work that crosses into plumbing territory. A#1 Air has taken the Best of DFW Air Conditioning award six consecutive years and holds memberships across every major industry certification body including NATE, EPA, ACCA, TACCA, and EGIA. A#1 Air operates at DFW scale, which can mean faster parts availability during peak summer demand, though it also means you may be working with a dispatcher rather than an owner.
The shift away from R-410A refrigerant is the single biggest pricing variable in 2026 that most homeowners do not anticipate. New systems now use A2L refrigerants — primarily R-454B — which require updated handling equipment, different recovery procedures, and technicians trained on mildly flammable refrigerant protocols. TexAire has made this transition a specific focus, actively walking customers through what it means for equipment selection, installation cost, and long-term service. If your existing system is R-410A and you are on the fence about repair versus replace, getting a clear explanation of the refrigerant cost difference from a contractor who has done this homework is worth the conversation. TexAire services all major brands including Carrier, Trane, Lennox, Goodman, Rheem, and Daikin.
These are estimates based on current DFW market data. Your actual quote will vary based on home size, attic conditions, electrical panel capacity, and equipment tier.
AC-only replacement (outdoor condenser and indoor coil, existing ductwork stays): A 2.5-ton system runs roughly $4,800–$7,500 installed. A 3-ton system runs $5,200–$8,500 installed. For larger homes requiring 4-ton or 5-ton units, or for premium efficiency tiers, expect $7,000–$13,000 or more.
Full HVAC system replacement (AC, furnace, and air handler together): The typical DFW range in 2026 is $8,000–$16,000 for a standard scope. Homes with complications — older electrical, difficult attic access, or equipment in a tight utility closet — can push toward $13,000–$21,000. A real-world example from Lewisville: a 2,100 square foot two-story home with 12-year-old ductwork in decent shape and a working electrical setup came in at roughly $11,800 installed for a 3.5-ton mid-tier system with a 10-year parts warranty.
Ductwork replacement: If your ducts need full replacement, add $3,000–$8,000 on top of system cost. Partial duct repairs or sealing are less expensive but should be quoted separately.
Refrigerant transition surcharge: Budget an additional $500–$1,000 compared to pre-2025 pricing as a baseline cost increase built into new A2L-compatible equipment.
Available rebates: Oncor’s Home Energy Efficiency program offers $400–$600 back on qualifying high-efficiency equipment. The program runs January through November, so a late-summer installation still qualifies. Note that the federal Section 25C tax credit for HVAC equipment expired December 31, 2025, and is not available for 2026 purchases as of this writing. Ask your contractor to confirm current Oncor rebate eligibility before signing anything.
Most Lewisville homeowners pay between $7,000 and $16,000 for a central AC installation in 2026, depending on system size and whether the project is an AC-only replacement or a full HVAC system swap. Homes with ductwork that needs replacement should budget an additional $3,000–$8,000 on top of that.
Two regulatory changes drove costs up: new SEER2 minimum efficiency standards that took effect in 2023 and the 2025–2026 transition from R-410A to A2L refrigerants such as R-454B. Together these added roughly $500–$1,000 to unit costs market-wide, and some equipment tiers that were common before are no longer manufactured.
Yes. The City of Lewisville requires a mechanical permit for AC replacement and installation. Any licensed contractor should pull this permit on your behalf before work begins. If a contractor suggests skipping the permit to save money, that is a significant red flag.
Oncor’s Home Energy Efficiency rebate program offers $400–$600 on qualifying high-efficiency systems and is open through November 2026. The federal 25C tax credit is not available for 2026 installations as of July 2026. Ask your contractor to verify current Oncor requirements before equipment is selected.
Get at least two or three written quotes that specify the exact equipment model number, tonnage, SEER2 rating, warranty terms, and whether the permit is included. Compare those details rather than the bottom-line price alone — a lower bid that excludes permits, uses a lower-efficiency unit, or carries a shorter warranty may cost more over time.
Price ranges above are estimates based on current DFW market data as of July 2026 and are provided for planning purposes only. Get written quotes from licensed contractors before making any purchasing decision.
Restaurant reviews, events, and local news from Lewisville, delivered weekly.
The week's top local news & events, free in your inbox. No spam — unsubscribe anytime.